Moderate Toxicity of Potential Boron-containing Therapeutic, Dipotassium-trioxohydroxytetrafl uorotriborate - K2 (B3 O3 F4 OH) in Rats and Mice

Abstract Biological activity of boron-containing compounds (BCCs) has been well-known. Growing interest and numerous applications for BCCs have been reported. Boron and boron-containing acids show low acute toxicity in mammals but data on halogenated boroxine (HB) - dipotassium-trioxohydroxytetrafluorotriborate, K2(B3O3F4OH) acute toxicity have not been reported before. This compound, characterized as a potential therapeutic for skin changes, exhibits no observable genotoxicity in doses lower that 0.1 mg/ml in vitro and 55 mg/kg in vivo. It has also been confirmed as an antitumour agent both in vitro and in vivo as well as an inhibitor of enzymes involved in antioxidant mechanisms. The aim of this study was to assess the acute toxicity of HB and to determine the maximum tolerated dose as well as a dose free of any signs of toxicity in different test organisms. Acute toxicity of HB was tested in Sprague-Dawley and Wistar rats and BALB/c mice after single parenteral application of different doses. We determined doses free of any sign of toxicity and LD50 after single dose administration. LD50 of HB ranges from 63 to 75 mg/kg in different test models, meaning that HB shows moderate toxicity

Preservation of phenolic compounds on dried leaf infusion of Bauhinia forficata Link

Abstract Bauhinia forficata Link aqueous extract is usually recommended as a phytomedicine to reduce blood glucose levels and its biological activity has been linked to the presence of phenolic compounds from B. forficata preparations. Several drying processes are used in the production of dry herbal extracts, which may influence the chemical composition and efficacy of final herbal medicines. Due to significant chemical changes, defining appropriate drying processes is essential for phytopharmaceutical drug development. In view of this, we analyzed dried B. forficata leaf infusion (BFLI) extracts by HPLC-UV-MSn, followed by molecular networking analysis to evaluate the chemical profiles from dried extracts yielded by freeze-and spray-drying processes. The main metabolites detected included 11 ferulic/isoferulic acid derivatives and 13 glycosylated flavonoids. The qualitative chemical profiles were alike for both drying processes, whereas the relative abundance of some flavonoids was higher using spray-drying. Taken together, our results showed that freeze-and spray-drying preserved the phenolic profile of BFLI and suggested that spray-drying may be the most suitable to obtain its dried products. Along with studying the chemical profiles of dried herbal extracts, evaluating the influence of drying processes on the quality and chemical profiles of final products is pivotal and may benefit future research.

Novel biopharmaceutical development investigations towards drug and formulation performance optimization

For a drug to excerpt pharmacological action after oral intake, it first needs to be released from the formulation, get into solution (dissolve), be absorbed, and reach the systemic circulation. Since only solubilized drugs can be absorbed, and thus have therapeutic effect, the understanding of the dissolution and drug release processes of a drug product is of primary importance. Such understanding allows a robust formulation development with an ideal in vivo performance. In order to meet set standards, the performance assessment of oral drug products, such as dissolution testing, often applies conditions that are not reflective of the in vivo environment. The use of non-physiologically relevant dissolution method during the drug product development phase can be misleading and give poor mechanistic understanding of the in vivo dissolution process. Hence, we hypothesized that applying physiologically relevant conditions to the dissolution test would result in more accurate in vivo predictability for a robust and precise development process. Since the buffering system in the intestinal lumen operates at low molarity values, phosphate buffer at low buffer capacity was used as a first approach to an in vivo relevant parameter. Furthermore, a biphasic system was used, that is, the low buffer capacity medium was paired with an organic layer (n-octanol) to mimic the concurrent drug absorption that happens with the in vivo dissolution. Both poorly and highly soluble drugs in immediate release formulations (ibuprofen and metronidazole, respectively) were tested in this set-up to assess the dissolution in the aqueous medium and the partitioning to the organic phase. Additionally, enteric coated formulations were tested in bicarbonate buffer at the in vivo reported molarities values to assess the impact of buffer species on drug dissolution. The evaluated parameters were the buffer system (bicarbonate buffer vs. phosphate buffer), buffer capacity and medium pH. In all approaches, dissolution was also carried out in compendial buffer for comparison purposes. Our results demonstrate that the USP-recommended dissolution method greatly lacked discriminatory power, whereas low buffer capacity media discriminated between manufacturing methods. The use of an absorptive phase in the biphasic dissolution test assisted in controlling the medium pH due to the drug removal from the aqueous medium. Hence, the applied noncompendial methods were more discriminative to drug formulation differences and manufacturing methods than conventional dissolution conditions. In this study, it was demonstrated how biphasic dissolution and a low buffer capacity can be used to assess drug product performance differences. This can be a valuable approach during the early stages of drug product development for investigating drug release with improved physiological relevance. Similarly, all the enteric coated formulations displayed a fast release in phosphate buffer and complied with the compendial performance specifications. On the other hand, they all had a much slower drug release in bicarbonate buffer and failed the USP acceptance criteria. Also, the nature of the drug (acid vs base) impacted the dissolution behavior in bicarbonate buffer. This study indicates that compendial dissolution test for enteric coated tablets lacks physiological relevance and it needs to be reevaluated. Thus, an in vivo relevant performance method for EC products is needed. Overall, the findings of this thesis comprehensively demonstrates that meaningful differences in performance and accordance to clinical reports were only obtained when physiological relevant conditions were applied. Hence, our results indicate that the central hypothesis was answered positively

Para que um medicamento exerça a ação farmacológica após a ingestão oral, ele primeiro precisa ser liberado da formulação, dissolver, ser absorvido e atingir a circulação sistêmica. Uma vez que apenas medicamentos solubilizados podem ser absorvidos e, assim, ter efeito terapêutico, a compreensão dos processos de dissolução e liberação de um medicamento é de extrema importância. Tal compreensão permite o desenvolvimento de uma formulação robusta com o desempenho in vivo ideal. Para atender aos padrões regulatórios previamente estabelecidos, a avaliação da performance de formulações orais, como por exemplo, o teste de dissolução, frequentemente aplica condições que não refletem o ambiente fisiológico. O uso de métodos de dissolução não fisiologicamente relevante durante a fase de desenvolvimento do medicamento pode gerar resultados equivocados sem uma compreensão mecanistica do processo de dissolução in vivo. Portanto, a hipótese desse trabalho é que a aplicação de condições fisiologicamente relevantes no teste de dissolução resultaria em uma predição mais precisa da dissolução in vivo para um processo de desenvolvimento robusto e preciso. Uma vez que o sistema tampão no lúmen intestinal possui baixa molaridade, o tampão fosfato com baixa capacidade tamponante foi usado como uma primeira abordagem como um meio de dissolução fisiologicamente relevante. Além disso, foi utilizado um sistema bifásico, ou seja, o meio de baixa capacidade tamponante combinado a uma fase orgânica (n-octanol) para imitar a absorção in vivo. Formulações de liberação imediata contendo fármacos de baixa e de alta solubilidade (ibuprofeno e metronidazol, respectivamente) foram testadas no sistema bifásico para avaliar a dissolução no meio aquoso e a partição para a fase orgânica. Ademais, formulações com revestimento entérico foram testadas em tampão bicarbonato nos valores de molaridades fisiológicos para avaliar o impacto da espécie tamponante na dissolução do fármaco. Os parâmetros avaliados foram o sistema tampão (tampão bicarbonato vs. tampão fosfato), capacidade tamponante e pH médio. Em todas as abordagens, a dissolução também foi realizada em tampão farmacopeico para fins de comparação. Nossos resultados demonstraram que o método de dissolução farmacopeico não foi discriminativo, enquanto o meio com menor capacidade tamponante diferenciou entre as formulações obtidas via granulação úmida ou compressão direta. Ademais, a utilização da fase orgânica no teste de dissolução bifásica auxiliou no controle do pH do meio aquoso. Portanto, os métodos não compendiais aplicados foram mais discriminativos do que as condições de dissolução convencionais. Neste estudo, foi demonstrado como a dissolução bifásica e uma baixa capacidade tamponante podem ser usadas para avaliar as diferenças na performance de formulações. Esta pode ser uma abordagem valiosa durante os estágios iniciais do desenvolvimento de medicamentos para investigar a liberação destes sob condições fisiologicamente relevantes. Da mesma forma, todas as formulações com revestimento entérico exibiram uma liberação rápida em tampão de fosfato e atenderam às especificações farmacopeicas. Entretanto, a liberação do fármaco foi muito mais lenta em tampão de bicarbonato e consequentemente não cumpriram com as especificações farmacopeicas. Além disso, a natureza do fármaco (ácido vs. base) impactou o comportamento de dissolução no tampão de bicarbonato. Este estudo indica que o teste de dissolução convencional para comprimidos de liberação retardada não possui relevância fisiológica e precisa ser reavaliado. Portanto, os resultados desta tese demonstram de forma abrangente que diferenças significativas na performance condizentes com relatórios clínicos foram obtidas apenas quando as condições fisiológicas relevantes foram aplicadas. Esses resultados indicam que a hipótese central foi respondida positivamente

Erding formula and bioactive markers in hyperuricemia: towards rational scientific approaches for the modernization of Traditional Chinese Medicine

Introduction: Traditional Chinese Medicine (TCM) represents one of the first holistic approaches in the world to treat and prevent disease. Herbal medicine is one of the major therapeutic remedy in TCM. It often involves multi-herb therapies instead of single herb preparations. Parallel to western medicine, hundreds of herbal formulas have been made available as finished products. Currently, the use of herbal products is popular as treatment option or to complement western medicine. Indications of the herbal formulas were established by TCM terms such as heat-clearing and/or detoxifying which lack modern pharmacological meanings. It is difficult for people without relevant background to understand such terms and their implications for treatments. Furthermore, due to the quality control issues of herbal medicines which contain multiple constituents, consumers may be confronted with the risk of using unstandardized products. Hence, in this thesis, the modernization of TCM is discussed through employing scientific pharmaceutical approaches to a traditional formula, called Erding formula (EF). The aim was to investigate if a new indication, hyperuricemia, can be assigned to a heat-clearing and detoxifying formula. Our hypothesis was: Can Erding formula be used for hyperuricemia treatment and is esculetin a bioactive marker for this new indication? Methods: A hypoxanthine and potassium oxonateinduced hyperuricemic mouse model, a xyleneinduced inflammatory mouse model, and an acetic acidinduced pain model were used to investigate EF and its constituent herbs. The quantity of esculetin was measured by high-performance liquid chromatography. The therapeutic effect of esculetin was assessed using potassium oxonate induced hyperuricemic mouse model, and esculetin and its metabolites were characterized in serum via ultra-performance liquid chromatographyquadrupole time-of-flight mass spectrometry. To develop a modern dosage form, a laboratory-scale wet bead milling approach was employed to prepare esculetin nanocrystals. The formulation was further optimized by design of experiment, and an optimized formulation was then characterized for its saturation solubility and short-term stability. Results: The study showed that EF and Viola yedoensis Makino (Viola) lowered uric acid (UA) levels, while EF and all four individual herbs had antiinflammatory and analgesic activities. These findings revealed that EF was able to treat hyperuricemia and suggested that Viola was the main herb in EF on reducing UA levels. The study showed that esculetin significantly reduced UA levels and six metabolites of esculetin were identified in serum. This confirms that esculetin was absorbed and is a suitable bioactive and quality control marker for EF in hyperuricemia treatment. An esculetin-Povacoat nanocrystal formulation with a 200 nm particle size was successfully prepared. The formulation presented up to a 1.5-fold increase in saturation solubility compared to the bulk esculetin and it was stable for 180 days. Conclusion: The studies proved that Erding formula can be used for hyperuricemia treatment with esculetin as bioactive quality control marker. As well, a new nano-sized formulation of the bioactive marker, esculetin, was created. This presented the possibility to develop an innovative nanotechnological product of the active substances derived from herbal medicine. The findings facilitated a better understanding of TCM terms and concept through mechanistic scientific experiments. This study revealed a potential pathway and an idea to modernize TCM without setting aside its unique concepts. This might increase the global acceptance of TCM products. Furthermore, the TCM concept might be useful in the development of multi-component drug products

Medicina Tradicional Chinesa (MTC) representa uma das primeiras abordagens holísticas em âmbito global para tratar e prevenir doenças. A fitoterapia consiste na principal terapia na MTC. Frequentemente, envolve terapias com múltiplas ervas em vez de preparações individuais. Paralelamente à medicina ocidental, centenas de fórmulas herbais foram disponibilizadas como produtos acabados. Atualmente, o uso de produtos fitoterápicos é popular como opção de tratamento ou para complementar a medicina ocidental. As indicações das fórmulas fitoterápicas foram estabelecidas pelos termos da MTC, tais como "limpeza pelo calor e / ou desintoxicante", que não têm significados farmacológicos modernos. É difícil para a população em geral e mesmo para profissionais sem histórico relevante na área entender tais termos e suas implicações para os tratamentos. Além disso, devido às questões de controle de qualidade dos medicamentos fitoterápicos que contêm múltiplos constituintes, os pacientes podem ser confrontados com o risco de usar produtos não padronizados. Assim, nessa tese, a modernização da MTC é discutida por meio da utilização de abordagens farmacêuticas científicas para uma fórmula tradicional, denominada fórmula de Erding (FE). O objetivo foi o de investigar se uma nova indicação, a hiperuricemia, pode ser atribuída a uma fórmula desintoxicante e de compensação de calor. Nossa hipótese foi: a fórmula de Erding pode ser usada para tratamento de hiperuricemia e a esculetina é um marcador bioativo para essa nova indicação? Foi empregado modelo de camundongo hiperuricêmico induzido por hipoxantina e oxonato de potássio, outro modelo de camundongo inflamatório induzido por xileno e, adicionalmente, modelo de dor induzida por ácido acético. Esses modelos foram usados para investigar a FE e suas ervas constituintes. A quantidade de esculetina foi determinada por cromatografia líquida de alta eficiência. O efeito terapêutico da esculetina foi avaliado utilizando modelo de camundongo hiperuricêmico induzido por oxonato de potássio, e a esculetina e seus metabólitos foram caracterizados no soro por cromatografia líquida de alto desempenho - espectrometria de massa. Para desenvolver forma farmacêutica moderna, uma abordagem de moagem em escala úmida reduzida foi empregada tendo em vista a preparação de nanocristais de esculetina. A formulação foi ainda otimizada empregado planejamento experimental. Essa fórmula foi caracterizada quanto à sua solubilidade de saturação e estabilidade a curto prazo. O estudo mostrou que a FE e a Viola yedoensis Makino (Viola) reduziram os níveis de ácido úrico (AU), enquanto a FE e as quatro plantas individuais apresentaram atividades antiinflamatória e analgésica. Esses resultados revelaram que a FE foi capaz de tratar a hiperuricemia e sugeriu que a viola foi a principal erva da FE na redução dos níveis de AU. O estudo mostrou também que a esculetina reduziu significativamente os níveis de AU e os seis metabólitos da esculetina foram identificados no soro. Tal resultado confirma que a esculetina foi absorvida e pode ser usada como marcador de controle bioativo e de qualidade para FE, no tratamento da hiperuricemia. A formulação de nanocristais de esculetin-povacoat® apresentou tamanho de partícula de 200 nm. A formulação apresentou aumento de 1,5 vezes na solubilidade de saturação em comparação com a esculetina em escala micrométrica e manteve-se estável durante 180 dias. Os estudos comprovaram que a fórmula de Erding pode ser utilizada no tratamento da hiperuricemia empregando a esculetina como marcador bioativo de controle de qualidade. Além disso, foi desenvolvida formulação inovadora, em escala nanométrica, do marcador bioativo, a esculetina. Esse resultado permitiu desenvolver produto com base nanotecnológica das substâncias ativas derivadas do fitoterápico, assim comol permitiram melhor compreensão dos termos e dos conceitos da MTC por meio de experimentos científicos mecanicistas. Esse estudo revelou potencial para a modernização da MTC sem excluir seus conceitos únicos. Isso pode aumentar a aceitação global dos produtos MTC. Além disso, o conceito de MTC pode ser útil no desenvolvimento de medicamentos de múltiplos componentes

Contraceptive and Infertility Target DataBase: a contraceptive drug development tool for targeting and analysis of human reproductive specific tissues†.

The long and challenging drug development process begins with discovery biology for the selection of an appropriate target for a specific indication. Target is a broad term that can be applied to a range of biological entities such as proteins, genes, and ribonucleic acids (RNAs). Although there are numerous databases available for mining biological entities, publicly available searchable, downloadable databases to aid in target selection for a specific disease or indication (e.g., developing contraceptives and infertility treatments) are limited. We report the development of the Contraceptive and Infertility Target DataBase (https://www.citdbase.org), which provides investigators an interface to mine existing transcriptomic and proteomic resources to identify high-quality contraceptive/infertility targets. The development of similar databases is applicable to the identification of targets for other diseases and conditions.

Organs-on-chip: The way forward.

Organ-on-chip (OoC) technology is thriving thanks to stem cells availability and international OoC programs. Concerted standardization, qualification, and independent testing of devices are needed to coherently develop OoC technology further and fulfill its potential in drug development, disease modeling, and personalized medicine. The OoC roadmap can lead the way forward.

The blood endothelial cell chamber - An innovative system to study immune responses in drug development.

The risk for adverse immune-mediated reactions, associated with the administration of certain immunotherapeutic agents, should be mitigated early. Infusion reactions to monoclonal antibodies and other biopharmaceuticals, known as cytokine release syndrome, can arise from the release of cytokines via the drug target cell, as well as the recruitment of immune effector cells. While several in vitro cytokine release assays have been proposed up to date, many of them lack important blood components, required for this response to occur. The blood endothelial cell chamber model is an in vitro assay, composed of freshly drawn human whole blood and cultured human primary endothelial cells. Herein, its potential to study the compatibility of immunotherapeutics with the human immune system was studied by evaluating three commercially available monoclonal antibodies and bacterial endotoxin lipopolysaccharide. We demonstrate that the anti-CD28 antibody TGN1412 displayed an adaptive cytokine release profile and a distinct IL-2 response, accompanied with increased CD3+ cell recruitment. Alemtuzumab exhibited a clear cytokine response with a mixed adaptive/innate source (IFNγ, TNFα and IL-6). Its immunosuppressive nature is observed in depleted CD3+ cells. Cetuximab, associated with low infusion reactions, showed a very low or absent stimulatory effect on proinflammatory cytokines. In contrast, bacterial endotoxin demonstrated a clear innate cytokine response, defined by TNFα, IL-6 and IL-1ß release, accompanied with a strong recruitment of CD14+CD16+ cells. Therefore, the blood endothelial cell chamber model is presented as a valuable in vitro tool to investigate therapeutic monoclonal antibodies with respect to cytokine release and vascular immune cell recruitment.

Development of a novel insulin receptor (IR) antagonist that exhibits anti-breast tumor activity.

Many reports have indicated that the insulin receptor (IR) causes tumorigenesis and the development of breast cancer. It has been considered a potential target for treating IR-related tumors. Traditionally, there are two categories of insulin receptor (IR) antagonists, they are small molecule antagonists and anti-IR antibodies. Here, we describe a new method (anti-idiotypic antibody strategy) for the development of IR antagonist. Hybridoma technology was employed to design and identify a series of anti-idiotypic antibodies against insulin. After repeated screening and identification, an anti-idiotypic antibody against IR (AK98) was obtained. Analysis through competitive ELISA and competitive receptor binding indicated that AK98 mimicked the receptor binding epitope of insulin. The interaction between AK98 and IR was determined using indirect immunofluorescence, immunoelectron microscopy, and Immunoprecipitation-Western (IP-WB). Further research using a tumor cell model revealed that AK98 inhibited insulin-IR binding and IR-mediated intracellular signaling pathways. Conclusively, the main purpose of this paper is that we proposed a new method (anti-idiotypic antibody strategy) to develop the insulin receptor (IR) antagonist (AK98), and a series of experiments showed that the anti-idiotypic antibody (AK98) exhibited good antagonistic activity against IR. This work suggests that the anti-idiotypic antibody may be a potential strategy to develop IR antagonists that can be used in treating breast cancer.

Placebo effect in subjects with cognitive impairment.

Understanding both the placebo response and the underlying disease progression is crucial to designing clinical trials and interpreting results in Alzheimer's disease (AD) research. The disease severity at different stage of disease (e.g., mild cognitive impairment (MCI), early or late AD) is related to the rate of disease progression, which make it even difficult for AD researchers to understand the clinical trial results. A model-based meta-analysis approach using all available historical data provides quantitative understanding of placebo effect and disease progression in AD and offers a useful tool to aid in both trial design and trial interpretation. The Critical Path Institute (C-Path) is a nonprofit organization founded in 2005 as a vehicle to develop tools to accelerate drug development. The drug development tool (DDT) with AD is the first-ever quantitative DDT to be endorsed by FDA and EMA, and is publicly available to researchers through C-Path's website: https://c-path.org/ad-cts-tool-request/.

Pharmacophore development, drug-likeness analysis, molecular docking, and molecular dynamics simulations for identification of new CK2 inhibitors.

Protein kinase 2 (CK2), an essential serine/threonine casein kinase, is considered an interesting target for cancer treatments. Different molecular modeling approaches such as pharmacophore modeling, molecular docking, and molecular dynamics simulations have been used to develop new CK2 inhibitors. This study presents a pharmacophore model that was generated by combining and merging the structure-based and ligand-based pharmacophore features and validated using receiver operating characteristic (ROC). Based on validation results revealing good predictive ability, this pharmacophore model was used as a three-dimensional query in a virtual screening simulation. Several compounds with different chemical scaffolds were retrieved as hits, which were further analyzed and refined using several molecular property filters. The obtained compounds were then filtered and compared to the crystallographic ligand on the basis of their predicted docking energies, binding mode, and interactions with CK2 active site residues. This step resulted in a compound with a high pharmacophore fit value and better docking energy. Molecular dynamics simulation indicated stable binding of the predicted compound to CK2 protein, characterized by root mean square deviation (RMSD) and root mean square fluctuation (RMSF) and hydrogen bond. Graphical abstract.

Current developments in LC-MS for pharmaceutical analysis.

Liquid chromatography (LC) based techniques in combination with mass spectrometry (MS) detection have had a large impact on the development of new pharmaceuticals in the past decades. Continuous improvements in mass spectrometry and interface technologies, combined with advanced liquid chromatographic techniques for high-throughput qualitative and quantitative analysis, have resulted in a wider scope of applications in the pharmaceutical field. LC-MS tools are increasingly used to analyze pharmaceuticals across a variety of stages in their discovery and development. These stages include drug discovery, product characterization, metabolism studies (in vitro and in vivo) and the identification of impurities and degradation products. The increase in LC-MS applications has been enormous, with retention times and molecular weights (and related fragmentation patterns) emerging as crucial analytical features in the drug development process. The goal of this review is to give an overview of the main developments in LC-MS based techniques for the analysis of small pharmaceutical molecules in the last decade and give a perspective on future trends in LC-MS in the pharmaceutical field.

gQSPSim: A SimBiology-Based GUI for Standardized QSP Model Development and Application.

Quantitative systems pharmacology (QSP) models are often implemented using a wide variety of technical workflows and methodologies. To facilitate reproducibility, transparency, portability, and reuse for QSP models, we have developed gQSPSim, a graphical user interface-based MATLAB application that performs key steps in QSP model development and analyses. The capabilities of gQSPSim include (i) model calibration using global and local optimization methods, (ii) development of virtual subjects to explore variability and uncertainty in the represented biology, and (iii) simulations of virtual populations for different interventions. gQSPSim works with SimBiology-built models using components such as species, doses, variants, and rules. All functionalities are equipped with an interactive visualization interface and the ability to generate presentation-ready figures. In addition, standardized gQSPSim sessions can be shared and saved for future extension and reuse. In this work, we demonstrate gQSPSim's capabilities with a standard target-mediated drug disposition model and a published model of anti-proprotein convertase subtilisin/kexin type 9 (PCSK9) treatment of hypercholesterolemia.

ADC Analysis by Hydrophobic Interaction Chromatography.

Hydrophobic interaction chromatography (HIC) is a traditional technique used for the separation, purification, and characterization of proteins. As the number of antibody-drug conjugates (ADCs) continues to increase in clinical trials, HIC and other orthogonal methods utilizing changes in hydrophobicity are being used for ADC characterization and analysis. Unlike other techniques, HIC uniquely allows for protein analysis under mild nondenaturing conditions that preserve the native structure and activity of the molecules. Analysis of the ADC in its native form is advantageous. Herein, we describe a generic HIC protocol for the screening, analysis, and characterization of ADCs using an ammonium sulfate buffer and a high-pressure liquid chromatography system. Parameters affecting data quality and interpretation are addressed. In addition, several recommendations are included for method optimization and troubleshooting.

Qualidade por Design Analítico (AQbD) aplicado no desenvolvimento e otimização de métodos cromatográficos / Analytical Quality by Design (AQbD) applied in the development and optimization of chromatographic methods

O guia Q8(R2) do guia ICH descreve Qualidade por Design (QbD) como "uma abordagem sistemática para desenvolvimento farmacêutico que começa com objetivos predefinidos e enfatiza produto, entendimento e controle dos processos, baseado em dados científicos sólidos e gestão do risco da qualidade". Os métodos analíticos são considerados parte integrante do desenvolvimento farmacêutico. Assim, a Qualidade por Design Analítico (AQbD) é justificável e recomendada para obter flexibilidade regulatória, reduzir os resultados fora de especificação, obter um alto grau de robustez e um método analítico econômico. O Planejamento de Experimentos (DoE) é um conjunto de ferramentas estatísticas que inclui delineamentos de triagem e otimização, no qual os fatores são sistematicamente variados para determinar seus efeitos nas respostas, o que permite a determinação de quais fatores são os mais significantes, a identificação de qual configuração de fatores resulta em respostas otimizadas e a identificação de interações entre os fatores. As abordagens QbD e AQbD permitem a melhoria contínua ao longo do ciclo de vida do produto farmacêutico e do método analítico, inclusive para reduzir a variabilidade do produto, melhorar o desempenho do processo, reduzir resultados fora da especificação, melhorar o desempenho analítico, entre outros. O Cloridrato de Verapamil foi escolhido como molécula teste para desenvolvimento do projeto. Na primeira etapa do estudo foi realizado uma triagem com 13 fatores e 20 experimentos, utilizando o delineamento Plackett-Burman, seguiu-se para a próxima etapa com 7 fatores e 16 experimentos através do delineamento fatorial fracionado (Res.: IV). A etapa de otimização foi realizada com 3 fatores e 20 experimentos utilizando o delineamento central composto. Após todas as etapas do estudo, as seguintes condições foram consideradas ideais: Fase móvel A - Tampão formiato de amônio 10 mM pH 3,0, Fase móvel B - Amoníaco 2,0% em acetonitrila, eluição do tipo gradiente, coluna cromatográfica XSelect CSH C18 (100mm x 4,6mm x 3,5 µm), fluxo de 0,7 mL/min, volume de injeção de 2 µL para teor e 10 µL para produtos de degradação. Os métodos desenvolvidos são robustos, validados e indicativos de estabilidade

The ICH guide Q8 (R2) describes Quality by Design as "a systematic approach to pharmaceutical development that begins with predefined goals and emphasizes product, understanding and control of processes, based on solid scientific data and Quality Risk Management ". Analytical methods are considered an integral part of pharmaceutical development. Thus, the application of QbD approach to analytical method development is justifiable and a recommended strategy to attain regulatory flexibility, to reduce out-of-specification results, to achieve a high degree of robustness and a cost-effective analytical method. DoE is a set of statistical tools which include screening designs and optimization designs. In DoE approach, the controlled input factors are systematically varied to determine their effects on the output responses, which allows the determination of the most important input factors, the identification of input factors setting leading to optimized output responses, and the identification of interactions between input factors. The QbD and AQbD approach allows the continuous improvement throughout the lifecycle of pharmaceutical product and analytical method, including to reduce product variability, to improve process performance, to reduce out-of-specification results, to improve analytical performance, among others. Verapamil Hydrochloride was chosen as a test molecule for the development of the project. In the first phase of the study, a 13-factor and 20-experiment screening was performed using the Plackett-Burman design, followed by the 7-factor and 16-experiment next stage through fractional factorial design (Res .: IV). The optimization step was performed with 3 factors and 20 experiments using the composite central design. After performing all the study steps, the following conditions were considered ideal: Mobile Phase A - 10 mM ammonium formate buffer pH 3.0, Mobile Phase B - 2.0% ammonia in acetonitrile, gradient elution, column chromatographic XSelect CSH C18 (100mm x 4.6mm x 3.5µm), flow rate of 0.7ml / min, injection volume of 2µL for assay and 10µL for degradation products. The methods developed are robust, validated and stability indicating

Novel Applications of Immuno-bioinformatics in Vaccine and Bio-product Developments at Research Institutes.

There are many challenges in the field of public health sciences. Rational decisions are required in order to treat different diseases, gain knowledge and wealth regarding research, and produce biological or synthetic products. Various advances in the basic laboratory science, computer science, and the engineering of biological production processes can help solve the occurring problems. Bioinformatics is defined as a field of science combined of biology, mathematics, physics, chemistry, and computer sciences. Recently, bioinformatics has been extensively used in the designing of the epitope, vaccines, antibodies, adjuvants, diagnostic kits, and therapeutic purposes (e.g., proteins, peptides, or small molecules). Moreover, bioinformatics includes chemoinformatics that has been employed to produce various biological or chemical products to target and combat pathogens. Bioinformatics is involved in other areas of data analysis and prediction, such as structural biology, system biology, phylogeny, population genetics, and next-generation data sequencing. To the best of our knowledge, no published study coherently described the benefits of bioinformatics fields applied for medication development or diagnostic aims in bio-productive and pharmaceutical/vaccine companies. Therefore, in the current review, we attempted to present the available bioinformatics resources, practical experiences, and other findings in the mentioned field along with providing a harmonized and applied model(s). The key points presented in the current review may help to elevate production and reduce the costs for the development of novel vaccines, medicines, and antibodies. In addition, these methods can facilitate the identification of organisms and may guarantee the quality of biological products.

Biorelevant intrinsic dissolution profiling in early drug development: Fundamental, methodological, and industrial aspects.

Intrinsic dissolution rate (IDR) is the surface specific dissolution rate of a drug. In early drug development, this property (among other parameters) is measured in order to compare different polymorphs and salt forms, guide formulation decisions, and to provide a quality marker of the active pharmaceutical ingredient (API) during production. In this review, an update on different methods and small-scale techniques that have recently evolved for determination of IDR is provided. The importance of biorelevant media and the hydrodynamic conditions of dissolution are also discussed. Different preparation techniques for samples are presented with a focus on disc, particle- and crystal-based methods. A number of small-scale techniques are then described in detail, and their applicability domains are identified. Finally, an updated industrial perspective is provided about IDR's place in the early drug development process.

Formulation development of a continuously manufactured orodispersible film containing warfarin sodium for individualized dosing.

Continuously manufactured orodispersible films (ODFs) offer a promising approach for individualized therapy with an easy to administer solid dosage form. The aim of this study was to develop a long ODF containing warfarin sodium to enable safe and more flexible dosing. Formulation development was conducted systematically for the continuous film coating process. A continuously working pilot-scale coating bench was used for film manufacturing and the viscosities of the polymer solutions were investigated to obtain processible formulations. The investigation of the mechanical properties of the long film was an integral part of the study, because the handling of the long film during flexible dosing differs distinctly from the handling of a single dosed ODF. The secant modulus and the yield stress were evaluated as parameters with high information value about the deformation behavior of the ODF. A long warfarin ODF was successfully produced using the pilot-scale coating bench equipped with an optical probe for in-line film thickness measurement. It was feasible to use the principle of a tape dispenser for flexible and, therefore, individualized dosing as proof of concept. Combining the long ODF with a dosing device allows individualized therapy with warfarin for all age groups manageable by the patient himself.

Development of a flow-through USP 4 apparatus drug release assay for the evaluation of amphotericin B liposome.

AmBisome® is a liposomal formulation of amphotericin B (Amp B), a complex parenteral antifungal product with no US FDA approved generic version available to date. For generic Amp B liposomal product development, examination of the drug release profile is important for product quality control and analytical comparability evaluation with the reference listed drug. Yet, there is no standardized in vitro drug release (IVR) assay currently available for Amp B liposomes. In this study, we describe the development of a USP-4 apparatus-based IVR assay capable of discriminating liposomal Amp B formulations based on the drug release profile. The goal of the IVR assay development was to identify release media compositions and assay temperatures capable of facilitating 70-100% of drug release from AmBisome® in 24 h without Amp B precipitation or disruption of liposome structure. We found that an addition of 5% w/v of γ-cyclodextrin to the release media of 5% sucrose, 10 mM HEPES, and 0.01% NaN3 (pH = 7.4) prevented Amp B precipitation and facilitated drug release. Increased IVR assay temperature led to increased drug release rate, and 55 °C was selected as the highest temperature that induced drug release close to our target without causing product precipitation. The developed IVR assay was used to discriminate between drug release rates from AmBisome® and micellar Amp B products like Fungizone® and Fungcosome. The IVR assay was also capable of discriminating between Amp B liposomes with the same composition as AmBisome® but prepared by either extrusion or homogenization processes, both of which resulted in measurable liposomal particle size heterogeneity and Amp B concentration differences. Finally, the USP-4 IVR assay was used to compare Amp B release profiles between AmBisome® and two generic products approved in India, Amphonex® (Bharat Serums and Vaccines Ltd.) (f2 = 66.3) and Phosome® (Cipla Ltd.) (f2 = 55.4). Taken together, the developed USP-4 IVR assay can be a useful tool for drug release profile characterization in generic liposomal Amp B formulation development.

Evaluation of Carbazeran 4-Oxidation and O 6-Benzylguanine 8-Oxidation as Catalytic Markers of Human Aldehyde Oxidase: Impact of Cytosolic Contamination of Liver Microsomes.

The present study investigated the contribution of microsomal cytochrome P450 and cytosolic aldehyde oxidase-1 (AOX-1) to carbazeran 4-oxidation and O 6-benzylguanine 8-oxidation in human liver microsomal, cytosolic, and S9 fractions. Incubations containing carbazeran and human liver microsomes with or without exogenously added NADPH yielded comparable levels of 4-oxo-carbazeran. O 6-Benzylguanine 8-oxidation occurred in microsomal incubations, and the extent was increased by NADPH. Human recombinant CYP1A2, CYP2C8, CYP2C9, CYP2C19, CYP2D6, CYP3A4, and CYP3A5 did not catalyze carbazeran 4-oxidation, whereas CYP1A2 was highly active in O 6-benzylguanine 8-oxidation. 1-Aminobenzotriazole, a pan-cytochrome P450 inhibitor, decreased O 6-benzylguanine 8-oxidation, but not carbazeran 4-oxidation, in microsomal incubations, whereas 1-aminobenzotriazole and furafylline (a CYP1A2-selective inhibitor) did not inhibit carbazeran 4-oxidation or O 6-benzylguanine 8-oxidation in human liver S9 fraction. Carbazeran 4-oxidation in incubations containing human liver microsomes (from multiple donors and commercial suppliers) was attributed to microsomal preparations contaminated with AOX-1, as suggested by liver microsomal experiments indicating a decrease in carbazeran 4-oxidation by an AOX-1 inhibitor (hydralazine), and to detection of AOX-1 protein (at one-third the level of that in liver cytosol). Cytosolic contamination of liver microsomes was further demonstrated by the formation of dehydroepiandrosterone sulfate (catalyzed by cytosolic sulfotransferases) in liver microsomal incubations containing dehydroepiandrosterone. In conclusion, carbazeran 4-oxidation and O 6-benzylguanine 8-oxidation are enzyme-selective catalytic markers of human AOX-1, as shown in human liver S9 fraction expressing cytochrome P450 and AOX-1. This study highlights the negative impact of cytosolic contamination of liver microsomes on the interpretation of reaction phenotyping data collected in an in vitro study performed in microsomal fractions.